Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Mansfield Homeowners
A gate that drags, binds, or refuses to close leaves your driveway exposed and your morning routine broken. Most gate repairs in Mansfield come down to three failures we see every week: a motor that lost its limit settings, a hinge that sagged under the weight of a 400-pound leaf, or a photo-eye knocked out of alignment by a storm. Vance Gate Repair has fixed over 22,000 gates since Adrian Vance started the company in 2014, and we work the same way on every job: a written price handed to you before we touch a tool, and a photographed record left with you when we leave. We answer the phone 24/7 at (682) 564-0512, and for most electrical and mechanical failures we can have a technician at your Mansfield driveway the same day you call.
What Our Gate Repair Service Includes
Gate repair is rarely one problem. It is usually a chain of small failures: a hinge wears, the leaf drops, the motor strains against the new angle, and the limit switch burns out trying to compensate. That is why we do not patch the symptom and leave. We walk the full gate, measure the geometry, test the motor, and document everything we find before we quote a single dollar. Here is what each repair category covers.
Electric Gate Repair
Electric gate repair covers everything from a dead motor to a control board that powers on but will not respond to the remote. In Mansfield, we regularly see boards damaged by brownouts and voltage spikes, particularly after summer storms roll through Tarrant County. We test the power supply at the board first, then work outward: transformer, capacitor, receiver, motor leads. If the board is bad, we tell you exactly what failed and what the replacement costs before we order a part.
Automatic Gate Repair
Automatic gate repair is the broader job: the motor, the opener arm, the receiver, the remote, the keypad, the safety edges, and the wiring connecting all of it. When your gate opens but will not close automatically, or closes and immediately reverses, it is almost always a sensor problem, not a motor problem. We trace the full loop: photo-eyes, edge sensors, loop detectors. Then we test the motor separately so we are not asking you to pay for a motor replacement when the real fault is a $40 photo-eye.
Hinge & Post Repair
Steel gates are heavy. A 16-foot residential gate leaf can weigh 400 to 600 pounds, and all of that weight hangs on two or three hinge pins. When a hinge wears, the gate drops a fraction of an inch, the latch misses the strike, and the motor starts grinding against the extra load. We replace or rebuild the hinge assembly, square the gate to the post, and confirm the leaf swings freely before we touch any motor settings. On welded-box steel posts that have cracked at the base, we can weld the post in place or fabricate a new steel anchor plate depending on what the concrete will hold.
Gate Realignment
Gate realignment is the job most people do not know they need until the gate starts scraping the driveway or the latch will not catch. The gate is off-square, either because the post shifted or the hinge wore or the previous installer never got it right. We measure the gap at top and bottom, determine where the swing plane is off, and reset the hinges or shim the post until the leaf sits level. This is one of our most common Mansfield repairs, and it usually takes under two hours when caught before the motor gets damaged.
Lock Repair
Gate locks fail in two ways: the mechanical lock stops turning, or the electric lock stops releasing when the opener fires. On a mechanical latch or deadbolt, we disassemble, clean, and replace worn internal parts, or swap in a new lock if the barrel is too far gone. On electric strikes and maglocks, we check the power supply, the strike alignment, and the interlock with the gate operator, because an electric lock that fires a half-second late will fight the motor and eventually break something. We carry replacement locks and electric strikes on our trucks, so this is usually a one-visit repair.
Weld & Rust Repair
Mansfield’s heat and occasional freeze-thaw cycles are hard on steel gates. Hairline cracks at the stiles, rust blooms at the bottom rail, pickets that have worked loose from the frame. We grind out the rust, cut away any steel that has gone thin, and MIG-weld new stock in place, then prime and paint to match as closely as the existing finish allows. On gates where the internal frame is rusted through and the skin is the only thing holding it together, we will show you the photos and give you a straight answer on whether repair or replacement makes more sense.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We service nine major gate-automation brands, and we do not steer you toward replacing a motor just because it is not the brand we prefer. That is not how Adrian built this company. LiftMaster is the most common operator we see in Mansfield driveways, and we stock their OEM control boards, limit switches, and remotes, so a faulty LiftMaster usually gets fixed the same day without waiting on parts. FAAC and BFT are the two hydraulic and electromechanical operators we most often encounter on heavier estate gates, and both have idiosyncrasies in their limit-setting procedures that a general handyman will not know. We have worked on FAAC 400-series and BFT Deimos units for close to a decade and we know their failure patterns: usually the capacitor first, then the limit microswitch.
Mighty Mule is the go-to for many Mansfield homeowners who installed their own opener, and it is a perfectly capable motor when it is wired and set correctly. Most Mighty Mule failures we see are installation issues, not product defects: the arm is mounted at the wrong arc, the limits were never set, the battery terminals corroded. We can repair any Mighty Mule, FAAC, BFT, or LiftMaster unit on the property, and if your operator is a different brand entirely, we will service that too. The gate is what matters, not the nameplate.
Before
AfterSigns You Need Gate Repair Right Now
- The gate hesitates or stutters when it cycles. A gate that starts, stops, and starts again is usually fighting a mechanical bind, not a bad motor. The longer it runs like that, the more damage it does to the gearbox, the arm, and the control board. We would rather fix a $200 hinge now than a $900 motor in six months.
- The gate reverses immediately after closing. This is the classic photo-eye or safety-edge signal. Something is telling the gate there is an obstruction when there is not one, and over time the constant reversing burns out the motor relay. We can usually trace and correct the sensor fault in under an hour.
- The gate scrapes the driveway or leaves a mark on the concrete. A sagging gate is not a cosmetic issue. Every scrape means the motor is lifting weight it was never designed to lift, and the hinge pins are taking load at an angle that accelerates wear. Caught early, this is a realignment job; ignored, it becomes a motor replacement.
- The remote works only from ten feet away, or not at all. Range problems are usually the receiver antenna, not the remote itself. If multiple remotes are suddenly weak, the receiver board or antenna connection has failed. We test the transmitter signal and the receiver sensitivity before recommending any replacement parts.
- The gate is making a sound you can now describe but did not used to hear. A new grind, whine, or clunk is a mechanical or electrical warning. If you can hear it, it is already affecting how the gate runs. We will track it down and photograph what we find.
Our Gate Repair Process – Step by Step
- 1
You call and a live person answers. No voicemail, no callback queue, no automated attendant at any hour. We listen to what the gate is doing, ask a few questions to understand the failure, and get a technician scheduled for your Mansfield property. If it is an emergency and the gate is stuck open or stuck closed, we will tell you what you can safely do in the meantime.
- 2
The technician arrives, named and photographed. You will know who is coming before they pull up. Our technicians are background-checked and uniformed. On site, they start with the obvious: power to the operator, condition of the hinges, alignment of the leaf, and any recent damage that explains the failure.
- 3
Diagnosis and documentation before any quote. We do not quote a gate repair until we have found the actual cause. The technician tests the motor, cycles the gate, opens the control box, and photographs everything: the limit switch setting, the wiring, the hinge wear, the board condition. You get to see what we saw.
- 4
A written price, and only then the work. Under Haven Standard Clause 1, the price is written and handed to you before any repair starts. You approve it, or you do not, and there is no charge for the visit. If you already have a written estimate from another company, we will review it free and tell you if it is fair, padded, or missing something.
- 5
The repair, the test, and the photo record. We fix what was broken, set the limits, adjust the force settings, and run the gate through at least a dozen full cycles. Before we leave, you get a photo log of every adjustment and a written record of the part number installed. Under Clause 4, that evidence is part of every job, at no additional charge.
How Much Does Gate Repair Cost in Mansfield?
Gate repair pricing in Mansfield depends on what failed and how long it takes to correct it. Here is what we see most often, in real dollars:
- Photo-eye realignment or replacement: $85-$180, including the new sensor if one is needed.
- Limit switch reset or replacement: $120-$240, depending on whether the switch itself is burned out or just out of adjustment.
- Hinge repair or replacement on a single leaf: $220-$450, depending on the hinge style and whether we can reuse the existing post or need to fabricate a plate.
- Control board replacement: $280-$520 for most residential boards, plus the part cost which varies by brand.
- Full motor or operator replacement: $750-$1,800, depending on the brand, the gate weight, and whether the existing arm and bracket can be reused.
- Weld repair or rust remediation: $180-$500, depending on how much steel needs to be cut out and replaced.
The biggest variable in Mansfield is whether the gate was installed correctly in the first place. We regularly open gates installed by landscapers or handymen who never set the force limits or used hinges rated for half the gate’s actual weight. That is also the most common way to overpay: a company that replaces a motor without fixing the hinge that killed it. We do not do that. Every free estimate we produce identifies the root cause, not just the symptom. If multiple components have failed, we list each one with its own price and mark which repairs are urgent and which can wait. You approve every line item before we order a single part.
Gate Repair Near Mansfield – Our Service Area
We work throughout Mansfield and the surrounding Tarrant County communities, including Gate Repair in Rendon, Gate Repair in Kennedale, Arlington, Cedar Hill, Grand Prairie, Midlothian, Burleson, Hurst, Bedford, Euless, and Fort Worth. For most Mansfield addresses, we can have a technician on site the same day you call for electrical and mechanical gate failures. If you are unsure whether we cover your street, call (682) 564-0512 and we will tell you straight. You can also start with our home page for a full picture of the company, or read more about Gate Repair in Mansfield specifically.
If you are in the market for something other than repair, we also handle gate installation when the existing gate is too far gone, gate motor and opener replacement when the operator fails entirely, gate access control for keypads, intercoms, and vehicle detection loops, and gate parts and welding for steel fabrication work.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Repair in Mansfield
Gate repair is any work that restores a gate to safe, reliable operation: fixing or replacing the motor, control board, hinges, lock, photo-eyes, safety edges, or the steel structure itself. In Mansfield, most repairs fall into two categories: mechanical (hinges, posts, alignment, welds) and electrical (motors, boards, receivers, sensors). Vance Gate Repair handles both, and we do not push replacement when a repair is more sensible.
Most Mansfield gate repairs take 1 to 3 hours on site. Sensor realignment, limit switch resets, and remote programming are typically done in under an hour. Control board replacement, hinge rebuilding, or weld work will run 2 to 3 hours. If a part has to be ordered, we tell you before we leave, give you a written timeline, and do not charge until the job is complete.
Gate repair in Mansfield typically runs $85 to $1,800 depending on the failure: a photo-eye replacement at the low end, a full motor replacement at the top. Common mid-range repairs like hinge replacement or control board swaps run $220 to $520. Every price is written and agreed before work starts, and the estimate is free. Call (682) 564-0512 for an exact quote on your gate.
Yes. We service LiftMaster, Mighty Mule, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and other brands. We stock OEM parts for LiftMaster and Mighty Mule specifically because they are the most common operators in Mansfield, so repairs on those brands usually happen same-day without ordering parts.
In most cases, yes. We answer the phone 24/7, and for a gate stuck open, stuck closed, or refusing to secure the property, we prioritize Mansfield calls. Same-day dispatch is available Monday through Sunday, including nights. If the technician cannot get there the same day, we will tell you that on the phone, not after you have waited three hours.
Every repair Vance Gate Repair completes is covered by our 365-Day Done Right Promise. If the repair is not right within one full year, we make it right at no additional charge. No argument, no fee, no expiration date within that window. That is the Haven Standard, and it applies to parts and labor alike.
Clear a path to the gate and the control box, and have your remote or keypad code ready if the operator is damaged. If your gate is automatic, make sure you have turned the operator off at the breaker or the manual disconnect if you can do so safely. You do not need to be home for the entire visit, but we do need access to the control box and a safe place to park. The technician will confirm everything on the phone before they arrive.
Schedule Your Gate Repair Service in Mansfield Today
A broken gate is not worth waiting on. Call (682) 564-0512 and speak to a live person, any hour of any day. We will schedule a technician, provide the name and photo before arrival, and hand you a written price before any work begins. Estimates are free. The 365-Day Done Right Promise covers every repair we complete.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Mansfield since 2014.