Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kennedale
Gate repair in Kennedale usually falls into one of two categories: the gate won’t move at all, or it moves but drags, sags, or won’t latch. Both are fixable, and most repairs on the acreage properties that define this part of Tarrant County run between $180 and $340 for hinge and alignment work, with motor and operator replacements starting around $450 and climbing based on the brand and how far the opener has to travel. Call (682) 564-0512 and we’ll get a technician to your driveway, usually the same day for urgent failures. The written price lands in your hand before any tool touches the gate.
Kennedale isn’t Arlington and it isn’t Mansfield. The gate stock out here is different, the soil underneath the posts is different, and the failure patterns repeat on a schedule the clay dictates. We work this area regularly enough to know which entrance style your street leans toward and what tends to fail first.
Why Vance Gate Repair Mansfield Is Kennedale’s Preferred Gate Repair Company
Most of the gates we service in Kennedale sit on half-acre to multi-acre parcels, not tight suburban lots. That changes the work. Long driveway runs mean longer operator arms, solar panels where mains power never got pulled, and heavier panels on posts set into Blackland Prairie clay that moves more than anyone expects. A company that only sees suburban ornamental gates will misread what’s happening underground. We won’t.
Adrian Vance started this company in 2014 out of commercial access-control work, where documentation is not optional. Every Kennedale job gets the same treatment: a written scope, a written price, and a photo record of what was found, adjusted, and installed. That’s The Haven Standard, and it’s the reason homeowners who already read the three-star reviews end up calling us. Under Clause 4, every visit leaves you with evidence, not a handshake and a hope.
We carry commercial-grade habits onto residential driveways. When we reset hinge posts off Little School Road, we photograph the excavation depth before concrete goes in. You get that photo. No future technician has to guess what’s buried there.
Our Gate Repair Services in Kennedale
Electric Gate Repair
Electric gates on Kennedale acreage usually fail at three points: the operator, the power source, or the safety circuit. We service nine major automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair what’s already bolted to your post instead of steering you toward a replacement you don’t need. Solar-powered openers on long driveways are common out here, and triple-digit summer heat is hard on their battery backup units. When the panel charges but the gate won’t cycle, the control board or the battery is usually the culprit, and we’ll name the failed part before we replace it.
Automatic Gate Repair
An automatic gate that runs but won’t stop in the right place has a limit switch problem. One that starts moving and reverses has an obstruction sensor issue, usually a misaligned photo-eye. On Kennedale’s clay, there’s a third pattern we see constantly: the ground shifts seasonally, the post heels a few degrees, and the gate’s travel path bends enough to confuse the operator’s settings. We don’t just reset the limits and leave. We measure the post, record the angle, and if the movement is the real cause, we tell you so and price the footing work alongside the electrical repair.
Hinge & Post Repair
This is the most common call we get in Kennedale, and it’s not close. The original tubular steel swing gates installed in the 1980s and early 1990s are still on hundreds of properties here. The panels themselves are usually fine. The hinge welds are not. Decades of ground movement and surface rust eat through the weld points, the gate drops, and suddenly the latch won’t engage. We fabricate replacement hinges to match the weathered steel, cut out the rotted sections, and reset the post if the clay has pushed it out of plumb. You keep the gate that matches your property. It works again.
Gate Realignment
Kennedale’s expansive Blackland Prairie clay swells and shrinks with every wet-dry cycle North Texas throws at it. Gate posts set into that soil heave seasonally, which is why a gate that latched fine in October can drag against the driveway by March. Realignment out here is not a one-time adjustment. It’s a recurring maintenance cycle on a schedule the soil dictates. We reset posts with deeper footings where the movement is chronic, but for gates with healthy footings, we true the panel, adjust the hinges, and give you a baseline photo record so you can see movement the next time it happens instead of guessing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Kennedale
Kennedale driveways run everything from new Ghost Controls openers on custom builds to original DoorKing and Viking operators on 1990s slide gates. We service all of them. That matters because replacement is rarely the first answer. When a Viking slide operator strips its gear teeth because the rack shifted with the clay, the fix is realigning the rack and replacing the gear, not swapping the whole unit. We keep common parts for these brands on our trucks, which means most Kennedale repairs finish in one trip.
Common Gate Repair Problems We See in Kennedale Homes
- Post heave from Blackland Prairie clay. Wet-dry cycles swell the soil, push posts out of plumb, and drop the gate’s latch side. We reset footings deeper than the original pour and document the new position.
- Solar opener failures in summer heat. Long driveway runs off solar power lose charge as triple-digit days degrade battery backup units. Gates die in place, usually at the worst time. We test the panel, the charge controller, and the battery separately so you don’t buy all three when only one failed.
- Corroded hinge welds on 1980s tubular steel gates. The weathered ranch look is worth keeping, but the welds holding it are done. We fabricate matching hinges and weld them in without changing the gate’s character.
- Slide gates binding on shifted racks. When the clay moves the post, the rack and pinion no longer line up, and the operator strips its gear teeth trying to force the cycle. We realign the rack, replace the gear if it’s chewed, and reset the travel limits.
Pricing for Gate Repair in Kennedale, TX
You want numbers before you call. Here they are for the Kennedale market.
Hinge replacement and weld repair on a tubular steel swing gate typically runs $180-$340, depending on whether one or both hinges need fabrication and whether the post needs resetting. Gate realignment runs $140-$260. Automatic gate troubleshooting and limit switch adjustment falls between $120-$300. Motor and operator replacement on a swing or slide gate starts around $450-$900 depending on brand, arm or rack condition, and whether solar components are part of the job. Post resetting with new concrete footings runs $300-$700 per post, and that’s the number that gets real when the clay has been moving your gate for thirty years.
Every one of those prices is written down and handed to you before work starts. No discovery surcharge, no end-of-job invoice that looks different from what you approved. That’s Haven Standard Clause 1, and it applies to every Kennedale job we take. Estimates are free. Call (682) 564-0512 and we’ll put a number in writing.
We Also Serve Cities Near Kennedale
Our Gate Repair team works the whole southern DFW corridor. If you’re in Arlington, Mansfield, Burleson, or Fort Worth, the same written pricing and documented repair process applies. You can also see our local page for Gate Repair in Kennedale coverage details and what to expect on a first visit.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Kennedale
The hinges are rarely the root cause. Your post is moving in Blackland Prairie clay. Kennedale sits directly on this expansive soil, which swells in wet periods and shrinks in drought. The cycle pushes posts incrementally out of plumb, and no hinge adjustment holds for long when the post underneath is drifting. We reset the post with a deeper footing that reaches below the active clay zone, then true the panel and rehang it. If you bring us a written estimate from another company, we’ll review it free. Call (682) 564-0512 and we’ll put your price in writing before any digging starts.
Yes, and that’s a call we make often. The panels on those older gates are usually thicker steel than anything sold today, and the weathered look matches the established ranch character of the property. The failure point is almost always the hinge welds and the post footing, not the gate itself. We cut out the corroded welds, fabricate new hinges to match the original steel profile, and weld them in. The gate keeps its character. It just works again. Most hinge and weld jobs on these gates run $180-$340 per hinge set. Call (682) 564-0512 for an exact quote, free and in writing.
The battery backup unit is almost certainly degraded from triple-digit heat. Solar panels on these systems produce enough current, but North Texas summers cook the batteries, and when the battery can’t hold a charge the gate dies in position, usually after a string of hot days. We test the panel output, the charge controller, and the battery separately. You only pay for the component that failed. Battery replacement on solar gate systems in Kennedale typically runs $150-$350. Call (682) 564-0512 and we’ll diagnose it on site, with the price written before any part gets swapped.
Yes. Automatic gate operators in Kennedale must have entrapment protection, which means photo-eyes, edge sensors, or both, depending on the gate type and operator. This is not optional. It’s a safety requirement for any automated gate. A misaligned photo-eye is also the most common reason a gate starts and then reverses for no apparent reason. We test the full safety circuit on every automatic gate repair and photograph the final configuration under Haven Standard Clause 4. If your gate lacks proper entrapment protection, we’ll price it separately and explain what’s required before anything is touched. Call (682) 564-0512 to schedule a check.
Heavy rain swells the clay, the post shifts, and the rack no longer lines up with the pinion gear on the operator. The gate binds, the motor strains, and if it runs long enough, the gear teeth strip. We realign the rack to the post’s new position, replace the gear if it’s damaged, and reset the travel limits. If the post movement is bad enough to affect the footing, we’ll price a post reset with deeper concrete so the cycle doesn’t repeat next wet season. Slide gate binding repairs in Kennedale typically run $200-$500 depending on gear condition. Call (682) 564-0512 for a free, written estimate.
Written by Adrian Vance, Owner at Vance Gate Repair Mansfield, serving Kennedale since 2014.