Gate Repair in Fort Worth - On-Site in 60 Minutes, Fixed the Same Day

Gate Repair in Fort Worth, TX

Gate access control in Fort Worth means keypads, remotes, phone entry, card readers, and video intercoms on properties that range from Fairmount bungalows to 2,000-acre horse operations west of Loop 820. The work here splits into two distinct markets: 2003-2012 ornamental iron driveway gates in far north Fort Worth subdivisions now hitting their first operator and access-control replacement cycle, and agricultural slide gates on caliche driveways where cattle and horses routinely bend track and clog rollers. Black gumbo clay heaves posts out of plumb every wet-dry cycle, which throws sensors and limit switches out of alignment. Call (682) 564-0512 and a live person answers, any hour.

Call (682) 564-0512

Why Fort Worth Homes Are Different

Fort Worth is still Cowtown in its land use. Working horse properties, equestrian estates, and ranch-style acreage sit inside city limits alongside standard suburban subdivisions, so a gate technician here has to be fluent in both ornamental iron residential gates and agricultural pipe-and-tube cattle gates. A Dallas shop rarely sees the second category. Far north Fort Worth, especially around the Alliance Corridor and the 35W/820 interchange, filled with master-planned subdivisions during the 2000s Barnett Shale boom, and those ornamental iron and aluminum driveway gates are now fifteen to twenty-two years old and entering their first major repair cycle. Meanwhile, historic neighborhoods like Fairmount, Ryan Place, and Berkeley Place have 1910s-1940s homes where decorative iron pedestrian gates sit on original masonry or aging wood posts that were never meant to carry an automatic opener.

Then there is the soil. Fort Worth sits on North Texas shrink-swell clay, the black gumbo that heaves and contracts between wet springs and baked summers. Gate posts lean, shift out of plumb, and crack surrounding concrete footings on a recurring basis. Post re-setting and hinge realignment are bread-and-butter repairs here in a way they are not in markets with stable soil. Periodic ice storms, most notoriously the 2021 Uri event, freeze and crack automated gate operators, hydraulic arms, and wiring that homeowners assumed were weatherproofed. In ranch corridors along Old Weatherford Road and far southwest Fort Worth, automatic slide gates on caliche or gravel driveways fail because livestock near the posts bends the track and clogs rollers with manure and debris, a failure mode almost nonexistent twenty miles east.

Our Main Fort Worth Services

Fort Worth homeowners call most often about three things: a gate that will not open or close, a gate that needs to be replaced or built new, and a motor or opener that has stopped responding.

Gate Repair in Fort Worth

Most repair calls in Fort Worth are swing gates that sag, drag, or refuse to latch, followed by slide gates bound up on bent track or clogged rollers. Post lean from clay soil is the single most common underlying cause. We reset posts, realign hinges, replace broken welds, and adjust operators to the actual travel of the gate, then photograph every adjustment. Gate Repair in Fort Worth covers the full repair scope.

Gate Installation in Fort Worth

New installs in Fort Worth have to account for the soil before the first post goes in. Footings in black gumbo need to be deeper and wider than a builder-grade standard, and decorative iron on a Ryan Place bungalow calls for different hardware than a ranch gate on Old Weatherford Road. Gate Installation in Fort Worth walks through what a Fort Worth install involves.

Gate Motor & Opener in Fort Worth

Fort Worth’s ice storms and summer heat kill gate motors faster than the national average. Homeowners with 2000s-era LiftMaster, Viking, or Ghost Controls operators often find the arm will not travel, the board will not respond, or the operator trips its breaker. We repair first, replace only when the motor is genuinely beyond service. Gate Motor & Opener in Fort Worth details the repair-or-replace decision.

Before

After

Gate Access Control in Fort Worth

Fort Worth’s mix of 2000s master-planned subdivisions and older in-town neighborhoods means access control systems here are often retrofits: a keypad or card reader added to a gate that originally ran on a simple remote. The 2003-2012 housing stock in far north Fort Worth is now at the age where original gate electronics fail, and homeowners want phone entry or video intercom so they can screen visitors without walking to the gate. Clay-soil post movement also knocks photo-eyes and limit switches out of alignment, which causes the exact symptoms homeowners describe as “the gate thinks something is in the way” or “the keypad stopped working.” Our Gate Access Control service covers everything from single-family keypads to multi-tenant phone entry systems.

Keypad Entry

Signs you need it

The keypad works intermittently, ignores certain codes, or has a cracked faceplate letting in North Texas rain and dust.

What it costs in Fort Worth

Keypad entry work in Fort Worth typically runs $180-$340 for a wired keypad replacement and $260-$480 when a new wireless keypad plus receiver is needed.

How we do it

We verify the existing wiring, set the new keypad to the gate’s actual travel limits, and photograph the final programming so the record is on file.

Video Intercom

Signs you need it

You cannot see who is at the gate before opening it, or the existing intercom’s audio is dead and the camera fogged over.

What it costs in Fort Worth

Video intercom installation in Fort Worth runs $750-$1,850 for a single-family wired system and $1,200-$2,800 when a cellular-capable system with mobile app access is required.

How we do it

We mount the intercom station, run and terminate the wiring, pair the inside monitor, and hand you a written record of the IP or cellular configuration.

What Gate Access Control Costs in Fort Worth

Can you add a keypad to a gate that was never set up for one?

Yes. Most gates can accept a wired or wireless keypad regardless of the original installation. We match the keypad protocol to the existing operator board and program it on site. Call (682) 564-0512 for a written quote.

Does a video intercom work with my existing gate motor?

Usually yes. Video intercoms integrate with most common residential operators, including Viking, Ghost Controls, and DoorKing. The intercom triggers the same input as a standard remote. Call (682) 564-0512 and we will confirm compatibility before any work is scheduled.

Gate Parts & Welding in Fort Worth

Gate parts and welding in Fort Worth means replacing hinges, posts, rails, and rollers that the local soil and livestock have worked loose or broken. In far north Fort Worth, ornamental iron gates installed during the 2000s are now showing cracked welds and worn hinge bearings. On ranch properties west and south of the city, cattle pressure against posts bends track sections and tears rollers out of alignment. Our Gate Parts & Welding service covers the structural side of gate work that most gate companies do not do in-house.

Hinge Replacement

Signs you need it

The gate sags visibly, scrapes the driveway, or the hinge pins are worn so thin the gate wobbles side to side.

What it costs in Fort Worth

Hinge replacement on a standard Fort Worth ornamental iron gate runs $185-$310 per set, including labor.

How we do it

We support the gate, cut or unbolt the old hinges, weld or bolt new hinges, and realign the gate to the post.

Post Replacement

Signs you need it

The gate post leans more than an inch out of plumb, cracks run through the concrete footing, or the post base is rusted through at ground level.

What it costs in Fort Worth

Post replacement in Fort Worth runs $360-$860, depending on depth of the new footing and whether the old concrete has to be broken out.

How we do it

We remove the old post, excavate a deeper footing to sit below the clay movement zone, set the new post, and pour concrete.

What Gate Parts & Welding Costs in Fort Worth

Can you weld a broken rail without replacing the whole gate?

Yes, in most cases. A cracked or rusted rail can be welded, plated, or sleeved to restore strength. We will give you the written price before any cutting or welding starts. Call (682) 564-0512 to send a photo or schedule a look.

How do you keep a new post from leaning again in Fort Worth clay?

We set the footing deeper than the original, typically below the active shrink-swell zone, and use a wider concrete collar. It does not guarantee against every drought year, but it dramatically reduces recurring lean. Call (682) 564-0512 for a site-specific assessment.

Brands We Service in Fort Worth

We service and repair gate operators from Viking, Ghost Controls, DoorKing, and Elite, along with five other major automation brands. Common boards, arms, and remotes are stocked in our Dallas-Fort Worth metro office, so most Fort Worth repairs do not wait on freight. See our brands for the full list.

Pricing for Gate Repair in Fort Worth, TX

Neighborhoods We Serve in Fort Worth

We cover the full city, from the ranch corridors southwest of town to the subdivisions along the Alliance Corridor. Most Fort Worth callers see a technician the same day.

• Fairmount
• Ryan Place
• Berkeley Place
• Alliance Corridor / far north Fort Worth
• Old Weatherford Road corridor

Service Area - Cities Near Fort Worth

Beyond Fort Worth proper, we serve the surrounding Tarrant County communities. Neighboring cities include North Richland Hills, TX, Hurst, TX, Kennedale, TX, and Bedford, TX.

FAQs About Gate Repair in Fort Worth