Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
Gate installation in Fort Worth splits into two very different jobs, and most companies only know one of them. There’s the ornamental iron driveway gate in a 2000s subdivision north of 820, and then there’s the 20-foot galvanized pipe cattle gate on a caliche driveway off Old Weatherford Road where the solar panel is the only power source for half a mile. We handle both, and we write the price down before we start. If you’re in Fort Worth and need a gate set, a motor mounted, or an entire entrance rebuilt, call (682) 564-0512 and a live person answers.
Why Vance Gate Repair Mansfield Is Fort Worth’s Preferred Gate Installation Company
Since 2014, Adrian Vance has built this company on a documentation habit that came out of commercial access control work: every visit leaves a written record and a photo log. Fort Worth homeowners get that same standard on a residential gate. The price is handed to you in writing before any work starts, under Haven Standard Clause 1. When the technician leaves, you get photos of what was found, what was set, and what was installed. No guessing later about which limit switch position was correct or which part number went in.
Our crews work in Fort Worth every week. That means when a gate post leans out of plumb in Ryan Place or a slide gate jumps its track near Benbrook Lake, we know the soil that caused it and the fix that holds. We’re not a Dallas shop guessing at Cowtown conditions. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and the technicians arrive in uniform with their name and photo sent before they show up.
The 365-Day Done Right Promise covers every installation. If something isn’t right within a full year, we make it right. No argument, no fee, no expiration date inside that window. That’s the entire point of running a gate company this way.
Our Gate Installation Services in Fort Worth
Sliding Gate Installation
Sliding gates are the workhorse of Fort Worth’s ranch corridors and the right answer for long driveways where a swing gate would need too much clearance. On caliche or gravel drives along far southwest Fort Worth, we mount heavy-duty rack and pinion drives because the soil shifts and livestock kick debris into the track. A typical sliding gate installation in Fort Worth with a 24V operator and keypad entry runs $4,800 to $9,500 depending on gate width and whether we’re pouring new footings. We set the safety photocells high enough to clear manure buildup, which matters if you run horses or cattle near the fence line.
Driveway Gate Installation
In Fort Worth subdivisions built between 2003 and 2012 around the Alliance Corridor and the 35W/820 intersection, driveway gates are mostly ornamental iron or aluminum, and many are now hitting their first full replacement cycle. We install new posts, hang the gate, and set the operator with the limits dialed correctly from day one. Fort Worth’s black gumbo clay heaves between wet springs and baked summers, so we pour footings to a depth that actually holds here, not the shallower spec a coastal crew might get away with. Expect $3,200 to $7,800 for a single ornamental driveway gate with motor depending on width, weight, and opener brand.
Double Gate Installation
Double swing gates on ranch driveways off Old Weatherford Road and in far west Fort Worth are bigger than suburban gates and they fail harder when the posts move. We use 6×6 steel posts sunk four feet into clay with 12-inch concrete footings, which is what it takes to keep a 20-foot span from sagging. A double gate installation in Fort Worth with dual operators and a loop detector typically runs $6,500 to $12,000. If there’s no mains power at the driveway head, we mount a solar panel and size the battery bank for North Texas winter cloud cover, not a California summer.
Pedestrian Gate Installation
Older Fort Worth neighborhoods like Fairmount, Ryan Place, and Berkeley Place have 1910s to 1940s homes with side-yard pedestrian gates set on original masonry or aging wood posts. We replace the post when it’s gone, reset the hinge geometry when it’s salvageable, and install a pedestrian gate that clears the sidewalk without binding. A steel pedestrian gate with new post and closer in Fort Worth runs $900 to $2,400 installed. Security gates with keypad or card access add $600 to $1,800 depending on the access control work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fort Worth
We work on whatever motor is already on your property. LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, Elite. That matters in Fort Worth because gates installed during the Barnett Shale boom years came with whatever brand the subdivision builder spec’d, and we don’t steer you toward a replacement just because we’re not familiar with the one you have. For new installations, we recommend based on the gate weight, the power situation at the driveway, and the duty cycle you actually need. We stock common parts for Fort Worth customers, which means less waiting when a control board or limit switch fails during a summer heat spike.
Common Gate Installation Problems We See in Fort Worth Homes
- Gate posts leaning in black gumbo clay. Fort Worth’s shrink-swell soil heaves and contracts dramatically between wet springs and dry summers. Posts set too shallow lean within two years, the gate binds, and the operator strips its gear. We reset posts in concrete footings sized for this soil, not for generic Texas clay.
- Solar panels undersized for North Texas winter. A solar gate opener sized for summer sun goes dark after three cloudy days in January. We size the panel and battery bank for Fort Worth’s actual winter cloud cover and short December days, and we log the amp draw during testing.
- Slide gates clogging on caliche drives. South and west Fort Worth ranch properties run gravel or caliche at the driveway head. Livestock kick manure and debris into the track, the rollers clog, and the gate jumps the rail. We set the track and rollers high enough to clear the buildup and use a rack that tolerates debris better than a chain drive.
- Operators cracked by ice storms. The 2021 Uri event froze and cracked hydraulic swing gate arms and shorted control boards that owners assumed were weatherproofed. We install operators with sealed boards and heated components where Fort Worth’s freeze-thaw cycle demands it, then document every setting so a future storm diagnosis is faster.
Pricing for Gate Installation in Fort Worth, TX
Gate installation in Fort Worth is priced by the gate, the operator, and the ground it’s set in. A single ornamental driveway gate with motor in a north Fort Worth subdivision runs $3,200 to $7,800. A 20-foot slide gate on a ranch drive with solar power and keypad entry runs $4,800 to $9,500. Double swing gates for wide ranch entrances run $6,500 to $12,000, and pedestrian gates run $900 to $2,400. The price is written and handed to you before any work starts, and it doesn’t change unless you change the scope. Estimates are free. Call (682) 564-0512 and we’ll schedule a measure, then you get a written quote you can keep.
| Gate Type | Fort Worth Price Range |
|---|---|
| Single ornamental driveway gate with motor | $3,200 - $7,800 |
| Sliding gate with solar operator and keypad | $4,800 - $9,500 |
| Double swing gate with dual operators | $6,500 - $12,000 |
| Pedestrian gate with new post and closer | $900 - $2,400 |
A Fort Worth Gate Job You’ll Only Find Here
Fort Worth is still Cowtown in its land use, and that’s not a slogan. There are working horse properties, equestrian estates, and ranch-style acreage inside city limits, particularly far west and south. A gate installer in Fort Worth has to be fluent in both agricultural pipe and tube cattle gates and residential ornamental iron. That dual market almost never exists in a Dallas or Plano shop twenty miles east. We install solar-powered operators on galvanized pipe cattle gates spanning 16 to 24 feet, set safety edges for livestock, and size the operator for a gate that gets cycled eight times a day by a horse trailer rather than twice a day by a sedan.
Off Old Weatherford Road, we set two 20-foot galvanized pipe gates on new 6×6 steel posts sunk four feet into black gumbo with 12-inch concrete footings. No mains power reached the driveway, so we installed a 24V solar gate opener with a loop detector and keypad entry. The owner runs cattle along the fence line, so we used a heavy-duty rack and pinion drive on the slide gate and set the safety photocells high enough to clear manure buildup. That job had every condition that makes Fort Worth gate work different from suburbia, and every setting was photographed and logged before we left.
We Also Serve Cities Near Fort Worth
Our Gate Installation crews cover Fort Worth proper plus the surrounding Tarrant County communities. We regularly work in North Richland Hills, Hurst, Kennedale, and Bedford. The same written pricing and photo documentation applies on every job, wherever the driveway is. Fort Worth remains our core service area, and we schedule these nearby cities on the same dispatch rotation.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Worth
Yes. We install 24V solar gate openers on galvanized pipe gates spanning up to 24 feet, which is common on far west Fort Worth ranch properties where running mains power to the driveway costs more than the gate itself. We size the panel and battery bank for Fort Worth’s winter cloud cover, and we log the system’s amp draw during testing so you know what the panel produces in December, not just July. The written quote includes the panel, battery, operator, and keypad or loop detector as line items. Call (682) 564-0512 and we’ll schedule a site measure.
For a full-size driveway gate in Fort Worth, we pour footings at least 36 to 48 inches deep with a 12-inch diameter concrete collar, depending on gate width and weight. Black gumbo clay heaves dramatically between wet springs and baked summers, and anything shallower will move within two years. For a 20-foot ranch gate, we go four feet down on 6×6 steel posts. The post depth is written into the quote, and the photo log shows the footing before concrete goes in.
A 24V DC operator with a high-torque arm or ram drive handles a double swing gate on a ranch driveway best, especially when the gate is wide and the posts are set in clay. We use operators sized for the gate’s actual weight and duty cycle, plus a solar panel and battery bank when there’s no grid power. The 365-Day Done Right Promise covers the installation, and every limit switch setting is photographed before we leave. Call (682) 564-0512 for a free quote.
Because livestock kick manure, hay, and caliche debris into the track, the rollers clog, and the gate rides up and off the rail. In Fort Worth’s south and west ranch corridors this is the most common slide gate failure we see. We set the track and rollers high enough to clear the buildup, use a rack and pinion drive that tolerates debris better than a chain, and set the safety photocells above the manure line. The fix is a reset and realignment, not a new gate.
Yes. We install ornamental iron and aluminum driveway gates throughout the Alliance Corridor, the 35W/820 area, and other north Fort Worth subdivisions built in the 2000s. Those gates are now hitting their first major repair and replacement cycle, and we quote both repair and full replacement so you can compare. The written price is yours before any work starts, and estimates are free. Call (682) 564-0512 to schedule a measure.
Get a Free Gate Installation Estimate in Fort Worth
If you’re in Fort Worth and your gate is leaning, jumping the track, or not there yet because you’re planning an entrance, call (682) 564-0512. A live person answers 24/7, and we’ll schedule a free measure. You get a written price before any work starts, a photo log when the job is done, and a full year under the 365-Day Done Right Promise. That’s how Vance Gate Repair Mansfield has done every Fort Worth gate job since 2014.
Written by Adrian Vance, Owner at Vance Gate Repair Mansfield, serving Fort Worth gate installation and repair since 2014.