Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in North Richland Hills, TX
Gate access control work in North Richland Hills usually comes down to two jobs: keypad entry that stopped talking to the opener, or an intercom that rings but won’t release the lock. The older cedar and ornamental iron gates across neighborhoods like Smithfield and Greenbriar were built before many modern access systems existed, so retrofits are common. Call (682) 564-0512 and you’ll get a live person, any hour.
Why North Richland Hills Homes Are Different
North Richland Hills developed heavily through the 1970s, ’80s, and ’90s as one of DFW’s original bedroom suburbs. That leaves a large, aging cohort of cedar privacy gates and ornamental iron driveway gates now hitting 30 to 50 years old at the same time. The posts holding those gates sit in Tarrant County’s expansive black clay, which shrinks in summer heat and swells after rain. Posts lean, hinges bind, and weld seams crack from the seasonal movement. In HOA-governed communities around Precinct Line Road and Davis Boulevard, any repair also has to match deed restrictions on materials, color, and style. A functional fix with the wrong finish can trigger a violation notice, so we photograph specs before sourcing hardware.
Our Main North Richland Hills Services
Most North Richland Hills homeowners reach out for one of three things: a swinging gate that won’t move, a new gate sized for an existing opening, or a motor that works intermittently. Each has its own page with full details.
Gate Repair in North Richland Hills
Repair calls here often start with a gate dragging on the ground or a hinge that’s pulled away from the post. On clay soil, we reset posts and realign hinges more than we replace them. See the full scope at Gate Repair in North Richland Hills.
Gate Installation in North Richland Hills
New gates in North Richland Hills need post footings deep enough to handle clay movement, plus materials that match HOA standards where they apply. We measure, quote in writing, and schedule deliberately. Details at Gate Installation in North Richland Hills.
Gate Motor & Opener in North Richland Hills
Older 1990s and 2000s operators on ornamental iron gates are now at the age where limit switches and actuator motors fail. We service whatever motor is already on the property. Full pricing at Gate Motor & Opener in North Richland Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in North Richland Hills
Gate access control in North Richland Hills means the electronics that decide who gets in: keypads, phone entry systems, card readers, and intercoms, all tied to the gate motor. Many homes here were built before these systems were standard, so we’re often retrofitting new hardware onto gates that are 30 to 50 years old. The clay soil complicates things because a shifting post knocks a photo-eye out of alignment, which then disables the whole access system. That’s why our service hub for Gate Access Control covers diagnostics as much as installation.
Keypad Entry
Signs you need it
The keypad lights up but the gate won’t move, or it works intermittently after rain.
What it costs in North Richland Hills
Keypad replacement or wiring repair runs $180-$520 depending on whether we’re matching an existing brand or switching protocols.
How we do it
We test voltage at the keypad, check the relay, and photograph the wiring before quoting the fix in writing.
Phone Entry
Signs you need it
Callers ring through but you can’t hear them, or the gate won’t release when you press the button.
What it costs in North Richland Hills
Phone entry system repair runs $220-$650; full replacement with a cellular unit runs $500-$1,400.
How we do it
We test the phone line or cellular signal, isolate the lock relay, and confirm the release command at the opener board.
Video Intercom
Signs you need it
The video feed is black, the audio is one-way, or the door release works only from inside the house.
What it costs in North Richland Hills
Video intercom repair runs $190-$580; a wired replacement costs $700-$2,000 depending on wire condition.
How we do it
We verify power at the monitor, test the camera feed, and replace the failing component rather than the whole system when possible.
What Gate Access Control Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Keypad replacement or wiring repair | $180-$520 |
| Phone entry repair | $220-$650 |
| Video intercom repair | $190-$580 |
Can you add a keypad to an existing gate in North Richland Hills?
Yes. We wire the keypad into the existing opener’s control board and program codes on site. Most retrofits take under two hours. Call (682) 564-0512 for a written quote.
Do HOA rules in North Richland Hills affect access control installs?
Often yes. Deed restrictions may limit where a keypad post can sit or require specific finishes. We photograph existing hardware and review HOA guidelines before quoting.
Gate Parts & Welding in North Richland Hills
Gate parts and welding in North Richland Hills often means saving a gate that’s still structurally sound but has failed at one or two points: a hinge plate rusted through, a post rotted below ground, or a weld cracked at a seam. The clay soil here torques posts seasonally, so hinge realignment and post reset are routine. Our Gate Parts & Welding hub covers the full scope.
Hinge Replacement
Signs you need it
The gate sags at the latch side, scrapes the ground, or the hinge pin has visible play.
What it costs in North Richland Hills
Hinge replacement runs $185-$465 including realigning the gate leaf to the post.
How we do it
We cut the old hinge, weld or bolt the new one, and set the gate back in plane with the post.
Post Replacement
Signs you need it
A wood post is soft at ground level or an iron post leans more than a few degrees off plumb.
What it costs in North Richland Hills
Post replacement runs $400-$950 with deeper footings to handle the clay movement.
How we do it
We dig below the frost and root zone, set the post in concrete with proper drainage, and rehang the gate.
What Gate Parts & Welding Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Hinge replacement | $185-$465 |
| Post replacement | $400-$950 |
| Weld repair at seams | $150-$350 |
Can you weld an iron gate back together in North Richland Hills?
Yes, when the surrounding metal is sound. We grind the area clean, weld the crack, and re-coat the seam. Call (682) 564-0512 and we’ll send a technician to look.
How long does a post replacement take in North Richland Hills?
Most post replacements are done in one day. We set the post in concrete and rehang the gate the same visit when weather allows.
Brands We Service in North Richland Hills
We work on Ghost Controls, DoorKing, Elite, Mighty Mule, and other major gate-automation brands. Common boards and limit switches are stocked locally for faster turnaround. See our brands for the full list.
Pricing for Gate Repair in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Keypad replacement or wiring repair | $180-$520 |
| Phone entry repair | $220-$650 |
| Video intercom repair | $190-$580 |
| Hinge replacement | $185-$465 |
| Post replacement | $400-$950 |
| Weld repair at seams | $150-$350 |
| Keypad full replacement | $300-$800 |
| Phone entry full replacement | $500-$1,400 |
| Video intercom full replacement | $700-$2,000 |
Prices in North Richland Hills shift with post depth, HOA finish requirements, and how far out of alignment the clay has pushed things. Every job gets a written price before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in North Richland Hills
We cover the full city, including older subdivisions where clay movement is most active.
- Smithfield
- Greenbriar
- Home Town
- North Park Estates
- Walker’s Creek
Response across North Richland Hills is typically same-day for emergency calls and next-day for scheduled work.
Service Area - Cities Near North Richland Hills
We also handle gate work in Hurst, TX, Bedford, TX, Fort Worth, TX, and Euless, TX. Dispatch is coordinated from our Dallas-Fort Worth office, with local crews serving North Richland Hills.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Emergency calls are typically answered same-day. A live person takes your call 24/7, and we dispatch a named technician with a photo before arrival. Scheduled repairs are usually next-day.
Most repairs like hinge replacement, weld fixes, and access control work don’t require a permit. New gate installations may need one depending on size and location. We can confirm during the estimate.
We photograph existing materials, finishes, and picket profiles before sourcing parts. That gives you a documented record to show the HOA and keeps the repair compliant with deed restrictions.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.