Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Bedford, TX
Gate access control in Bedford usually means adding or repairing a keypad, intercom, or card reader on a driveway gate that was built in the 1970s or 1980s, and the fix often starts at the post, not the electronics. We work on those older gates every week, and the first thing we check is whether the post has shifted in the black clay before we touch a wire. If your gate won’t open from the keypad or the remote stopped working, call (682) 564-0512 and we’ll give you a written price before any work starts.
Why Bedford Homes Are Different
Bedford is fully built out. There is no new tract housing going in, which means nearly every gate we service sits on a post that was set forty or fifty years ago. The original builders dug narrow holes, dropped in a post, and poured a skinny concrete collar around it. North Texas black clay does not sit still. It shrinks hard in the summer when the temperature stays above 100 for weeks, then swells back when spring rain arrives. That cycle works those old collars until they crack, and the gate starts leaning toward the latch side and dragging the driveway. Homeowners assume the gate is done and needs replacement. More often the gate itself is fine; the footing under the post is what failed. This matters for access control too, because a keypad or card reader mounted on a leaning post will bind and misread. You cannot set a limit switch correctly when the post is six degrees out of plumb. In Bedford we fix the post first, then the electronics.
Our Main Bedford Services
These are the three jobs Bedford homeowners call us about most, each with its own page and its own pricing detail.
Gate Repair in Bedford
Gate repair here usually means resetting a post that has tilted in the clay, replacing hinges that have sheared, or re-welding a sagging frame corner. We write the price before we start, and we photograph what we find. The full breakdown, including what a post reset costs in Bedford, is on our Gate Repair in Bedford page.
Gate Installation in Bedford
A new gate on a 1970s Bedford lot needs a footing that can handle this soil. We dig a belled pier, set the post, and let the base flare resist the expansion and contraction. The process and the price ranges are explained on our Gate Installation in Bedford page.
Gate Motor & Opener in Bedford
Bedford’s ice storms put a sudden load on opener arms and gearboxes that were already tired. When a motor fails here, it’s often because the gate was dragging first. Read about motor replacement, opener troubleshooting, and what it costs on our Gate Motor & Opener in Bedford page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Bedford
Gate access control in Bedford usually fails at the mounting point before the circuit board does. A keypad or intercom mounted on a post that has shifted in the clay will read codes inconsistently, and a card reader that is no longer level will drop its signal. The fix is often a post reset and a re-termination, not a whole new system. That is the Bedford pattern we see most. For a deeper look at the service itself, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad accepts some codes but rejects others, or the buttons work only when the gate is fully closed.
What it costs in Bedford
Keypad replacement in Bedford runs $160 to $370 installed, depending on whether we reuse the existing wiring or need to run a new low-voltage line.
How we do it
We check the post for plumb first, then test the wiring, replace the keypad, program the codes with you, and photograph the final settings.
Phone Entry
Signs you need it
The intercom loses the call when the gate cycles, or the speaker cuts out on one side of the conversation.
What it costs in Bedford
Phone entry system repair in Bedford runs $160 to $640 depending on whether we replace the board, the handset, or the whole unit.
How we do it
We trace the phone line or cellular module, identify whether the fault is in the unit or the wiring, replace what is needed, and test the call through a full open and close cycle.
Card Reader
Signs you need it
The reader beeps but does not release the gate, or cards that worked last week now fail.
What it costs in Bedford
Card reader replacement in Bedford runs $160 to $550 installed, with the range depending on whether we are matching an existing access control panel or adding a standalone reader.
How we do it
We verify the reader wiring and the panel output, replace the reader, re-enroll the cards, and leave you a written record of the wiring changes.
What Gate Access Control Costs in Bedford
| Item | Typical range in Bedford |
|---|---|
| Keypad replacement | $160 - $370 |
| Phone entry repair | $160 - $640 |
| Card reader replacement | $160 - $550 |
Can you add a keypad to a gate that never had one?
Yes. We run a new low-voltage line from the opener to the post, mount the keypad, and program it to the existing motor. In Bedford the main variable is whether the post is sound enough to hold a weather-tight enclosure. Call (682) 564-0512 and we’ll put a number on it before any work starts.
Why does my gate remote work some days and not others?
In Bedford, intermittent remote trouble is often a post that has shifted enough to change the antenna angle or pinch the receiver wire. We test the radio signal at the board, not just the remote. The fix may be as simple as re-terminating a wire that has pulled loose.
Gate Parts & Welding in Bedford
Most parts and welding calls in Bedford are on gates built in the 1960s through the 1980s, where the original hinge bolts have rusted through or the frame has cracked at a weld that is older than the homeowner. The soil movement that tilts posts also twists gate frames, and that torsion is what pops welds. We replace the part or repair the steel on site, and we document every piece so you are not paying for the same diagnosis twice. More detail is on our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate scrapes the ground on the latch side and the hinge leaves are visibly separated from the post or the gate stile.
What it costs in Bedford
Hinge replacement in Bedford runs $140 to $380 per hinge, including cutting or grinding off the old bracket and welding in the new one.
How we do it
We support the gate, cut or grind the failed hinge free, weld in a new one sized to the original post, and photograph the bead before and after.
Post Replacement
Signs you need it
The post is cracked at the concrete line, or it leans more than a few degrees so the gate cannot be re-hung straight.
What it costs in Bedford
Post replacement in Bedford runs $360 to $1,400 depending on depth, whether the old concrete has to be broken out, and what the new footing needs to be.
How we do it
We excavate the failed footing, set a new post in a belled pier with the concrete flared at the base, re-hang the gate, and photograph the footing before we backfill.
What Gate Parts & Welding Costs in Bedford
| Item | Typical range in Bedford |
|---|---|
| Hinge replacement | $140 - $380 per hinge |
| Post replacement | $360 - $1,400 |
| Welding repair | $110 - $330 per repair location |
Can you weld a gate without taking it off the hinges?
Sometimes, yes. A cracked stile or a separated corner can often be welded in place if the gate is supported and the post is still sound. We plate and reinforce the repair so it holds under the gate’s own weight. The price is quoted before we strike an arc.
Is it worth repairing a 40-year-old gate or should I replace it?
If the steel is not rusted through and the post is the only failure, repairing is usually half to a third of replacement cost. In Bedford we reset posts on original wrought-iron gates all the time. You get the repaired gate with the same weight and character, on a new footing that will outlast the old one.
Brands We Service in Bedford
We work on LiftMaster, FAAC, and Mighty Mule openers in Bedford, and we carry common boards, remotes, and photo-eyes for those brands in the truck. Most parts are on hand, and if we need to order a specific FAAC board, it is usually in within one to two business days. See our brands for the full list.
Pricing for Gate Repair in Bedford, TX
| Service | Typical range in Bedford |
|---|---|
| Keypad replacement | $160 - $370 |
| Phone entry repair | $160 - $640 |
| Card reader replacement | $160 - $550 |
| Hinge replacement | $140 - $380 per hinge |
| Post replacement | $360 - $1,400 |
| Welding repair | $110 - $330 per repair location |
Two things push a Bedford job toward the top of those ranges. The first is a post that has to be excavated and reset in a new footing before the actual repair can begin, and the second is damage from a winter ice storm that sheared more than one component. When we hand you the written scope and the written price, that number is exact and agreed before we touch a tool.
Neighborhoods We Serve in Bedford
We cover all of Bedford, including these areas where the 1970s-era gate posts are thickest:
- Chestnut Ridge
- Springhill Estates
- Timber Creek
- Willow Bend
- Bedford Falls
A live person answers our phone around the clock, and we schedule Bedford visits the same day whenever the job is an emergency gate failure.
Service Area - Cities Near Bedford
We also run regular routes through the neighboring Mid-Cities communities. If you are in Euless, TX, Hurst, TX, North Richland Hills, TX, or Grand Prairie, TX, we can schedule the same documented, written-price service there. The soil and the gate stock are similar across the corridor, so the repair pattern is familiar to us.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bedford
For a gate that is stuck open, stuck shut, or won’t respond at all, we can usually dispatch a technician to Bedford the same day. A live person answers at (682) 564-0512 around the clock, so you will speak to someone who can schedule, not a recording. The written price comes before the work, even on an emergency call.
Repairs and most like-for-like part replacements do not require a city permit in Bedford. Installing a new gate with new footings can, depending on the setback and whether it is in a utility easement. We will tell you during the estimate whether your job needs city review, and we can handle the paperwork if it does.
Bedford has many established neighborhoods with active HOAs, and some have architectural guidelines for front-facing driveway gates. If you have design rules, bring them to the estimate and we will match the scope to them. The price you get is the price you pay, and the written scope includes any HOA-driven materials or finishes.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.