Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hurst
Gate repair in Hurst usually comes down to one thing: the Blackland Prairie clay under your post footing. When a gate leans, binds, or trips its safety photocell in this city, the cause is almost always the soil movement beneath it, not the motor or the hinges alone. We’re the crew Hurst calls when the gate that worked last spring won’t close in July. Our technicians serve Hurst daily, know the neighborhoods off Precinct Line Road and Pipeline Road, and carry the parts to fix most gates on the first visit. If your gate is leaning, dragging, or stopped halfway, call (682) 564-0512 and a live person will answer.
Why Vance Gate Repair Mansfield Is Hurst’s Preferred Gate Repair Company
Hurst homeowners tend to do their homework before calling a gate company. They’ve read the reviews, they’ve looked at the brand name on the motor, and they want a straight answer about price. That’s how we work. Vance Gate Repair Mansfield has repaired over 22,000 gates since Adrian Vance founded the company in 2014 out of commercial access-control work, and every single one got a written price before the first tool came off the truck. No verbal estimate, no surprise invoice at the end. That’s Haven Standard Clause 1, and it applies to every job in Hurst, from a rusted hinge on a 1965 wrought-iron gate to a full slide-gate motor replacement.
We dispatch background-checked, uniformed technicians to Hurst with their name and photo sent to you before arrival. When they leave, you get a documented photo record of what was found, what was adjusted, and what was installed. That’s Clause 4 of the Haven Standard, and it means the next technician who works on your gate won’t have to guess what the last one did. Every repair is covered by our 365-Day Done Right Promise: if the fix isn’t right, we make it right at no charge, no argument, for a full year.
Our Gate Repair Services in Hurst
Electric Gate Repair
Electric gate repair in Hurst often starts with a motor that hums but won’t move the gate. On older swing gates in the 1960s tracts, we frequently find the operator is fine and the real problem is a post that’s drifted off plumb, which puts the arm bracket in a bind. We check the motor, the limit switches, and the post footing together, because fixing only the electrical side leaves the mechanical cause untouched. When we finish, you get written readings and a photo log of every adjustment.
Automatic Gate Repair
Automatic gate repair in Hurst means diagnosing why the gate stops halfway, reverses unexpectedly, or won’t respond to the remote. In tight-lot neighborhoods where slide gates are common, the usual culprits are a rack that’s accumulated clay dust, a photocell knocked out of alignment by post movement, or a loop detector that was never properly laid for the shared right of way. We service nine major gate-automation brands, including Ghost Controls, DoorKing, and Elite, so the answer is almost never “you need a new motor” unless the motor is genuinely failed.
Hinge & Post Repair
Hinge and post repair is the core of what we do in Hurst, because the clay under this city never stops moving. A wrought-iron gate that worked for fifty years is now leaning 3 to 4 inches because the original post footing cracked and shifted with the seasonal heave. Replacing the hinge without resetting the post is a temporary fix. We dig out the old footing, check for drainage, pour a deeper footing with gravel at the base so water doesn’t sit against the concrete, and then weld new hinges onto the original gate panel. The gate hangs plumb, and the record of what we did goes home with you.
Gate Realignment
Gate realignment in Hurst is about more than adjusting hinges. A gate that drags on the latch side or won’t close flush against the post is usually telling you the post itself has moved. We measure the gap, photograph the current position, reset the post or shim the hinges as needed, and document the final measurements. You get a written before-and-after so you can see exactly what changed, and we file the same record in our job history so any future repair starts from a known baseline.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Hurst
Hurst’s gate operators run on whatever the builder or a previous homeowner installed, which means a single street can have Ghost Controls on one house, Mighty Mule three doors down, and a DoorKing on the corner. We service all of them, plus LiftMaster, FAAC, BFT, Linear, Viking, and Elite. Our trucks carry common boards, remotes, photocells, and limit switches for these brands, so we’re not driving back to a supply house before we can finish the job. If your operator was installed in the last two decades, there’s a strong chance we stock the part it needs.
Common Gate Repair Problems We See in Hurst Homes
- Post lean from clay heave: The Blackland Prairie clay under Hurst swells when wet and shrinks when dry, and it can move a post 3 to 4 inches off plumb in a single year. A gate that leaned after the spring rains will usually lean worse by August. The fix is post re-setting, not just hinge tightening.
- Rusted hinges on 50-year-old wrought iron: The original gates in Hurst Hills and along Precinct Line Road are now 40 to 60 years old. Hinge fatigue and rust-through are common, and welding a new hinge onto a rust-thinned panel takes a welder who knows how not to blow through the old steel.
- Slide gates binding on tight lots: Many Hurst driveways don’t have room for a swing gate, so slide gates are the standard solution. But when the post footing shifts or the rack fills with clay dust, the gate binds and trips the safety photocell. The motor gets blamed; the footing is usually the problem.
- Photocells tripping in summer heat: Hurst summers push 100 degrees, and the metal posts holding a photocell expand and contract enough to knock the beam out of alignment by an inch or two. A photocell that trips every afternoon is often a misaligned beam, not a failed sensor.
Pricing for Gate Repair in Hurst, TX
Gate repair in Hurst runs on transparent, written pricing. A hinge and post re-set on a standard residential swing gate typically runs $280 to $520, depending on whether the footing needs to be re-poured and how much welding the post requires. Gate realignment without post work is usually $160 to $300. Swing-gate motor replacement in Hurst lands between $450 and $950 for most brands, including the operator, arm bracket, and limit-switch setup. Slide-gate rack repair or replacement runs $220 to $600 depending on the length and access. Every price is written and handed to you before we start, which is Haven Standard Clause 1, and every quote includes the photo-documentation record at no additional charge. We also offer a free second opinion on any written estimate from another company. Bring us the paperwork and we’ll review it honestly.
Call (682) 564-0512 and we’ll schedule a free estimate. The price you see is the price you pay, before any work begins.
We Also Serve Cities Near Hurst
Our Gate Repair team serves the entire Mid-Cities corridor, so if you’re in North Richland Hills, Bedford, Euless, or Fort Worth, the same written-price standard and documented photo record applies. When you search for Gate Repair in Hurst, you’re getting a crew that knows this soil and these gates better than anyone driving in from across the metroplex.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hurst
Because the hinge adjustment never addressed the post footing. Hurst’s Blackland Prairie clay swells and shrinks with every wet-dry cycle, and the movement is enough to pull a post out of plumb within a single season. A hinge adjustment straightens the gate for a few weeks, then the clay heaves again and the lean returns. The only lasting fix on most Hurst properties is post re-setting with a deeper footing and gravel drainage. Call (682) 564-0512 and we’ll tell you honestly whether your post needs resetting or whether a hinge repair will hold.
Yes, we can. Our crew reset a leaning wrought-iron swing gate on a shared driveway off Precinct Line Road in Hurst Hills: the original 1960s hinge post footing had cracked from clay heave, so we poured a deeper post footing with gravel drainage before welding new hinges onto the original gate panel and re-hanging it plumb, all without blocking the neighbor’s access lane. We plan the work around the narrower side of the right of way and keep one lane open at all times. That’s standard practice on every shared driveway job in Hurst.
It’s usually the track or the rack, not the motor. On tight lots where the slide gate runs close to the house, clay dust and soil movement from the adjoining right of way get into the rack teeth and bind the gate mid-travel, which trips the safety photocell and stops the operator. We clean and align the rack, check the post footing for movement, and verify the loop detector placement before we ever condemn a motor. A slide-gate diagnosis in Hurst should start with the mechanical path, not the electronics. Call (682) 564-0512 for an honest assessment.
We repair original Hurst wrought-iron gates regularly, and we’d rather save the gate than replace it. The 1960s and 1970s gates throughout this city were built with heavier steel than most modern replacements, and they’re usually worth keeping. We weld new hinges onto existing panels, patch rust-thinned sections, and reset the original posts into properly drained footings. If the gate panel is too far gone, we’ll tell you that in writing with photos, but we don’t push replacement when a repair will hold.
The photocell beam is almost certainly misaligned, not failed. Hurst’s summer temperatures make the metal brackets and posts holding a photocell expand enough to shift the beam off target by an inch or two, which tells the operator something is in the path and trips the safety circuit. It happens most often in the afternoon when the metal is hottest. We realign the beam, photograph the new position, and if the bracket is deformed, we replace it with a heat-stable mount. It takes about twenty minutes and the gate stops ghost-tripping. Call (682) 564-0512 and we’ll get it set.
Call Vance Gate Repair Mansfield for Gate Repair in Hurst
When a gate leans, binds, or won’t close, the problem underneath it rarely goes away on its own, and in Hurst the clay is always working against the post. You need a crew that knows this soil, these 1960s gates, and how to fix the footing instead of just the hinge. That’s what we do. Every job gets a written price before work starts, a documented photo record when we leave, and a full year of coverage under the 365-Day Done Right Promise. Adrian Vance built this company on commercial-grade documentation applied to residential gates, and that’s the standard you get on every visit. Call (682) 564-0512 for a free estimate, day or night. A live person answers.
Written by Adrian Vance, Owner at Vance Gate Repair Mansfield, serving Hurst with documented gate repair since 2014.
Gate Repair in Nearby Areas
